Спортивно-игровой комплекс Perfetto Sport Valore PS-106--> 1.75--> PLA пруток XYZPrinting 1.75 мм зелёный

PLA пруток XYZPrinting 1.75 мм зелёный


Reviewed by:
Rating:
5
On 01.01.2019

Summary:

.

PLA пруток XYZPrinting 1.75 мм зелёный

материал PLA;тип пруток, круглый;диаметр 1.75 мм;цвет зеленый;подходит для 3D принтера


Обзор:

Сварка прутка PLA Greg PLA пруток XYZPrinting 1.75 мм зелёный

XYZprinting PLA acid) filament produces quality prints with good strength and surface finish. Extracted from biocompostableit’s a 3D printing filament that’s safe, reliable, and very easy to use.

PLA пруток XYZPrinting 1.75 мм зелёный

This makes the go-to filament for both beginner and users.
630 руб.

PLA пруток XYZPrinting 1.75 мм зелёный

В Даймонд Электрике можно купить pla пруток Мастер Пластер 1.75 мм зелёный по Акционной цене.
This XYZprinting PLA Filament Cartridge works in my 1.0 AiO, producing excellent quality prints.

PLA пруток XYZPrinting 1.75 мм зелёный

PLA definitely produced finer layers the ABS filaments, which resulted in much nicer prints. The "natural" color is fairly translucent and looks great without needing to be finished in any.

PLA пруток XYZPrinting 1.75 мм зелёный


Buy XYZprinting PLA Filament, 1.75 mm, 600 g NFC Spool, Black, RFPLCXEU01B at Amazon UK. Free delivery on eligible orders.
Продолжить Compatible, PLA Filament, 1.75mm Filament Diameter, Clear Yellow Color.

PLA пруток XYZPrinting 1.75 мм зелёный


PLA пруток XYZPrinting 1.75 мм 6 цветов. ABS пруток XYZPrinting 1.75 мм зелёный.

PLA пруток XYZPrinting 1.75 мм зелёный


3D Color-inkjet PLA is designed to be easily installed and replaced that you enjoy a seamless 3D printing experience da Vinci Color.

After use, you can keep the PLA filament in a plastic bag and store it in a cool place. It’s that simple.

PLA пруток XYZPrinting 1.75 мм зелёный


600-g spool of 1.75-mm 600-g spool of 1.75-mm filament Print temperature ranges from 215 to 250 degrees C (419 to 482 degrees F) Black color For use with the XYZPrinting da Vinci 1.0/1.1/2.0/AiO 3D printer
Find many great new & used options and get the best deals for XYZprinting PLA Filament Cartridge 1.75 Mm Diameter Nature at best online prices at eBay!

shipping for many products!

PLA пруток XYZPrinting 1.75 мм зелёный


This neon green XYZprinting PLA Filament is a 600g spool designed for use with a selection of their 3D printers. PLA filaments are made with polymerized lacticwhich is extracted from corn, sugarcane, other sugar-containing crops.

PLA пруток XYZPrinting 1.75 мм зелёный

In order to navigate out of this carousel please use your heading key to navigate to the next or previous heading.
Prints have a very nice rock-candy or crystalline look extremely smooth продолжить чтение />Supports can be tricky to remove due to the flexible nature of vs.
Prints should not need much finishing and does not appear to tolerate sanding well; needle files make work better for cleaning up rough spots.
PLA prints, while more detailed and flexible that ABS, also seem a bit more fragile,so this needs to be taken into account when choosing what to print with what material in order to avoid disappointment with your prints.
This product also features one of the new refillable cartridges so you can disassemble refill using an XYZ refill kit.
Overall a nice addition to the Davinci but you should not order without first checking the XYZ site to make sure your printer is compatible as -is or needs a new extruder.
I have tried three cartridges of the PLA so far.
The first orange or whatever they called it нажмите для деталей very well.
It had a far easier time staying flat for the large prints than my ABS attempts ever did.
When I ran out I ordered the green color version and had but issues.
Even the test prints built in to the machine resulted in clogged that were so bad I had to disassemble the machine to fix.
I exchanged the green cartridge for another and had the same results.
My biggest issue with all of this though is that I can only order a couple of colors with a California shipping address.
I have read there was a mistake on some of the product descriptions that causes this, but I have no idea if увидеть больше is the case or if certain colors really do contain a chemical banned from this state.
This XYZprinting PLA Filament Cartridge works well in my XYZprinting 1.
PLA definitely produced finer layers than the ABS filaments, which resulted in much nicer prints.
The "natural" color is fairly translucent looks great without needing to be finished in any way.
I noticed that the nozzle and print bed needed to be cleaned more often and thoroughly than with the ABS to prevent clogging, but otherwise this is just about perfect for most of the figures I print.
CFH I am a rookie in the 3D printing world.
So I must say this filament works as proposed, I already used whole cartridge and no drama.
It went smooth and I didn't have any issues.
I am using it on a XYZ pro and it works great, the quality of the filament is very />In the photos, some of the stuff I printed using this filament.
I got this for the new XYZprinting 1.
The cartridge design, leaving me a bit frustrated.
The printer recognized the cartridge and set the temps automatically, then started having problems.
The filament would catch on the inside and jam the printer, and the chip used to tell the printer went bad, leaving me to manually set the temps if I was going to use it.
It prints great on my Da Vinci 1.
My only complaint is that it is only 200 meters.
Even their ABS rolls are 240 meters.
So when you don't have enough PLA left on the roll for your next print, the whole thing is trash.
But it's a issue.
PS - If your Da Vinci 1.
It's not like we as XYZprinting 3D printer owners have much of a choice when it comes to filament, but in general I find the filaments to be pretty good.
I reviewed one as "okay" in that the printer reported the new cartridge as having 200m assuming meters of filament where as the "Neon Magenta" ABS filament, also listed as 600g, reported as having 240m.
Both the PLA black and ABS magenta are listed as 600g, but the black has 200m and the magenta has больше информации />Are they really the same посмотреть больше measurement but different lengths of material?
Am I getting shorted on the PLA black?
I use a zyxprinter pro jr works very good on this printer set 210 to 220 load filament every time I print so it will not jam.
I do not know if you need to do this but my print come out goo Page 1 of 1 Page 1 of 1 This shopping feature will continue to load items.
In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading.
Prime enjoy FREE Two-Day Delivery and exclusive access to music, movies, TV shows, original audio series, and Kindle books.
After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.
After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.

Комментарии 10

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *